QED ST1000 0.80”/20MM Groundwater Sampling Pump

Combines High Sample Accuracy and Proven Reliability with Small Diameter.

Dexter, MI (DATE) - Q.E.D. Environmental Systems, Inc., a leading manufacturer of innovative environmental products and subsidiary of Graco Inc. (NYSE: GGG), highlights its Well Wizard ST1000, which provides the high sample accuracy and proven reliability of QED's Well Wizard dedicated bladder pumps in a smaller diameter format. The sampling device is the heart of every low-flow groundwater monitoring system. This is why the ST1000, which goes deeper than other pumps and has a durable construction, provides tremendous value to organizations with these systems.


The ST1000, being 0.80" (20mm) OD, can sample wells as small as 1" diameter at depths over 600 feet (183m), which is far deeper than other small diameter bladder pumps. Further, you can sample wells at almost unlimited depth with its optional drop tube inlet kit. This pump also fits larger wells with partial obstruction.

The product of QED's decades of experience and service, this pump proves reliable in many environments, and the long life of the bladder provides years of reliable operation. Indeed, the pump is defined by its durability. It has a 316 stainless steel construction and uses QED's exclusive DuraFlex PTFS bladder formulation. The pump also uses a QED twin bonded tubing, specifically, HDPE that is either teflon-lined or all teflon. QED is so confident in the resilience of this pump that it provides a 10-year sampling pump warranty.

The ST1000 is also distinguished by its industry leading performance. The pump has an operating pressure of up to 300 PSI. It also supports flow rates up to 474 milliliters per minute (ml/min). Further, the pump achieves low flow sampling accuracy that is EPA accepted.

These pneumatic bladder pumps are specifically designed for superior low-flow sampling performance. They operate with a unique, gentle action ideal for low-flow sampling. Their timed on/off cycles of compressed air also alternately squeeze the flexible bladder to displace water out of the pump, and then release it to allow the pump to refill by submergence. This all occurs without creating any disturbance that could affect sample chemistry.

These pumps run easily at low rates for extended times, without having problems associated with other pumps on the market. For example, there is no overheating of high-speed electric pump motors, a problem that can alter samples and ruin pumps. There is also no churning action, which is seen in bailers or inertial-lift samplers that increase turbidity. Degassing of dissolved volatile contaminants is also avoided, as there is no suction. Moreover, the pump helps protect against disturbance or the risk of cross contamination, as the bladder prevents contact between the pump drive air and the sample, and the down well equipment is permanently dedicated to each well.

About Q.E.D. Environmental Systems, Inc.
Q.E.D. Environmental Systems, a subsidiary of Graco Inc., is a leading manufacturer of innovative environmental pumping systems, landfill products, landfill gas products, and air strippers for use at landfills, mines, oil refineries and other industrial sites, as well as hazardous waste cleanup sites. Our products are used around the world for a wide range of environmental applications, including groundwater sampling, groundwater remediation pumping, landfill leachate and condensate pumping, landfill gas collection and control, landfill and biogas analysis, air stripping and VOC removal, and wireless data acquisition. Based in Dexter, MI, QED serves customers from support centers in Michigan and California. For more information, call 734-995-2547 or contact us at info@qedenv.com.

Featured Product

Get RFQs on Die Casting, Stamping, and Extrusion With Xometry, Your Source for Custom Parts

Get RFQs on Die Casting, Stamping, and Extrusion With Xometry, Your Source for Custom Parts

Xometry is your source for custom parts. Now, in addition to getting instant quotes on 3D Printing, CNC Machining, Sheet Metal, and Injection Molding, customers can create and send RFQs for die casting, stamping, and extrusion work to our nationwide network of pre-vetted manufacturers with just a 2D drawing. You will receive and be able to review responses from qualified shops within 7 days on an advanced web-based RFQ management platform. To learn more go directly to our site to issue and RFQ today. Stop wasting time managing RFQs through email and by phone, and start issuing RFQs at scale and in the cloud.