Bringing WiFi into Large Buildings: Ayrstone introduces the AyrMesh® IndoorHub
The new AyrMesh IndoorHub is a simple indoor meshing WiFi access point. The new IndoorHub is an upgrade to Ayrstone's successful IndoorAPwith several important improvements.
North Oaks, MN (AgPR) August 1, 2018 - Ayrstone has built a reputation by creating products for spreading WiFi outdoors across thousands of acres. However, farms and rural businesses have buildings, and getting WiFi inside those buildings is more important all the time. The increase in automation products and need to keep in touch with smartphones mean that WiFi is needed everywhere on the farm: outside and inside.
The new AyrMesh IndoorHub is a simple indoor meshing WiFi access point. The new IndoorHub is an upgrade to Ayrstone's successful IndoorAPwith several important improvements. First, the new IndoorHub uses 2x2 MIMO to provide higher bandwidth and better indoor coverage. Second, the new IndoorHub uses meshing, so the first IndoorHub can be connected to an Ethernet port and additional IndoorHubs can be spread through a large building, requiring only power. Finally, the new IndoorHub comes with its own power supply and does not depend on another device for power. The IndoorHub allows anyone to easily fill a large building with WiFi without having to run cables, even if you don't have any other Ayrstone products. All Ayrstone products are designed to be simple enough for any rural homeowner or businessperson to install - no networking experience is needed.
"The new IndoorHub is a big improvement to Ayrstone's product line," said Bill Moffitt, President of Ayrstone Productivity. "The old AyrMesh IndoorAP was good for providing WiFi inside a small building, but the new IndoorHub delivers twice the bandwidth and allows you to have WiFi throughout a large building."
The AyrMesh IndoorHub is available now at the Ayrstone store - http://ayrstone.com.
Featured Product
The ERT150 - Dorner's Next Evolution of Edge Roller Technology Conveyors
The next evolution in Dorner's Edge Roller Technology conveyor platform, the ERT®150, is ideal for small and light-load assembly automation, as well as medical and medical-device assembly application. The ERT platform is the only pallet conveyor of its kind available with an ISO Standard Class 4 rating for cleanroom applications. Earning the ISO Standard 14644-1 Class 4 rating means Dorner's ERT150 will conform and not contribute to the contamination of cleanrooms to those standards. As implied by its name, the ERT150 (Edge Roller Technology) uses rollers to move pallets through the conveyor smoothly with no friction (a byproduct often seen in belt-driven platforms). The conveyor's open design eliminates concerns of small parts or screws dropping into rollers and causing conveyor damage or jamming. The ERT150 is suited to operate in cleanroom environments requiring a pallet handling conveyor. It is capable of zoning for no or low-back pressure accumulation and is ideal for automation assembly applications within industries including medical devices, electronics, consumer goods among others.
