Novotechnik - Heavy Duty Redundant Angle Sensors
Housing of the RFX 6900 Series is anodized aluminum and sealed to IP 67 or IP 69K—depending on version. Conforms to ISO 13849 for safety related applications. MTTF is 46 to 92 years—depending on version/channels. RFX 6900 Series sensors have housing dimensions of: diameter is 69 mm and height is 20.4 mm.
Southborough, MA… Novotechnik, U.S. announces the RFX 6900 Series of touchless rotary sensors. These magnetic sensors are design for use in mobile, safety-related and extreme environment applications. Now with custom ranges available.
Housing of the RFX 6900 Series is anodized aluminum and sealed to IP 67 or IP 69K-depending on version. Conforms to ISO 13849 for safety related applications. MTTF is 46 to 92 years-depending on version/channels. RFX 6900 Series sensors have housing dimensions of: diameter is 69 mm and height is 20.4 mm.
Electrical angular range is 0 to 360° with single and fully redundant versions. RFX 6900 Series has a maximum independent linearity of ≤ ±0.5 % of full scale. Measuring ranges include 0 to 60, 120, 180, 240, 300, 360 degrees and custom. Output options are 4 to 20 mA and CANopen. Resolution is 14-bit for CANopen version. Repeatability is 0.2° for analog version and ≤ 0.36° for CANopen version.
Operational speed is unlimited mechanically and update rate is 1 and 5 kHz for CANopen and analog versions respectively. Shock is up to 50 g and vibration is up to 20 g. RFX 6900 is programmable for these parameters: Position, speed, cams, working areas, rotating direction, scale, offset, node-ID and baud rate.
For more information contact Novotechnik U.S., Inc., 155 Northboro Road, Southborough, MA 01772 • Phone: 508-485-2244 • Fax: 508-485-2430 • Web: www.novotechnik.com/rfx69
Featured Product
US Digital's New L2 Low Profile Motor Encoder
The L2 incremental encoder uses US Digital's proven EM1 optical encoder module and disk, which has billions of device-hours of dependable service in customer applications. This product continues US Digital's strong reputation for reliable, field-tested encoders. The L2 is US Digital's lowest height encoder that uses the EM1 module. It has a 0.75 in. bolt-spacing mount. The maximum resolution is 1250 CPR (5000 PPR with quadrature). The L2 comes with a single-ended output. Another benefit of the L2 incremental encoder is its fast installation. The cover snaps onto the base to secure the module. It is designed for use with a high-retention connector or cable (sold separately). Like all US Digital products, the L2 is designed and manufactured in Vancouver, Washington, USA. It is backed by prompt access to our technical and customer service teams with same-day shipping on most orders.
